revive 100 natural silk

revive 100 Natural Silk is a 100% genuine recycled waste silk paper

A perfect choice where a 'recycled' look and high environmental responsibility is required.
100% de-inked post consumer waste paper
Economically priced - cost effective recycled alternative to virgin fibre LWC grades.
High opacity enabled lighter weights to be used.
Suitable for long print runs that are budget sensitive e.g. direct mail
Special makings and bespoke sizes are available
Suitable for heatset web offset and sheet fed applications
Complies with Royal Mail - Sustainable Mail programme criteria

If you wish to include a material credit on your printed work we recommend the following text :-

Printed on revive Pure Natural Silk
A recycled paper containing 100% post consumer waste and manufactured at a mill that is certified with ISO 14001 environmental management standard.
Pulp used to produce this product is not bleached

Available exclusively from the Robert Horne Group.

Applications

annual reports
calendars
catalogues
corporate literature
direct mail
envelope production
envelopes
greeting cards
inserts
magazines
manuals
menus
posters
promotional print
wrapping paper

Available In

g/m²

100

115

130

150

170

g/m²	450 x 640	640 x 900	720 x 1020
90		+
100	o	•
115	+	+
130	•	+	+
150	+	•	+
170		•

Sizes shown in mm.

o Ream wrapped.
+ Bulk packed on pallets.
• Ream wrapped or bulk packed on pallets.

Environmental Information

Fibre source: 100% de-inked post consumer waste.
Bleaching: Recycled fibres used in this product are Process Chlorine Free (PCF)
Disposal: This material can be disposed of by recycling.

Additional Information

Technical Information

Substance g/m² (approx)	80	90	100	115	130	150	170
Caliper µm (approx)	76	86	95	106	116	134	150
Opacity (ISO) %	95	96	98	99	99	99	99
Brightness (ISO) D65	81	81	81	81	81	81	81
Whiteness CIE D65	150	93	93	93	93	93	93
Gloss (Gardner) 75° TS	30	30	30	30	30	30	30
Smoothness (Bendtsen) ml/min TS	50	50	50	50	50	50	50
Smoothness (Bendtsen) ml/min WS	50	50	50	50	50	50	50
Rigidity (Taber Stiffness Units) 15° MD	1.1	1.3	2.2	3.2	3.5	5.3	7.2
Rigidity (Taber Stiffness Units) 15° CD	0.6	0.6	1.3	1.5	1.8	2.8	3.5
Surface pH	7.8	7.8	7.8	7.8	7.8	7.8	7.8

Technical Capability

Printing process: Litho
Screen ruling: 150 plus
Printing inks: Use of inks formulated for silk coated papers is preferred
Varnishing: Machine or UV silk screen varnishing are both possible. Best results are obtained on top of emulsion sealing. Good results have been obtained by spot varnishing on solids or dense tones by either method. Any varnish applied directly to unprinted areas of the sheet may cause variations in gloss levels.
Emulsion sealing: Yes, 130gsm and above, below this weight there may be a tendency to curl, therefore a trial is recommended to ensure that the result is satisfactory.
Hot foil blocking: Yes
Film laminating: Yes
Creasing: If folding material 150gsm and above or through a solid or dense tone, pre-creasing is advisable by using a creasing matrix.

Accreditation

Produced at a mill that is certified to the ISO14001 environmental management standard.
This product has been awarded the NAPM 100% Recycled Mark

Purchasing Policy

The Robert Horne Group is committed to the responsible purchasing of paper products. This commitment will be realised through a stepwise approach to responsible purchasing that utilises the best available techniques and information. Robert Horne requires its suppliers to abide by all local, state and national laws and international conventions. For further information and full Responsible Paper Purchasing Policy, visit:http://www.roberthorne.co.uk/environment